Instant protection for your family
at the touch of a button. Comforting huh?
Remco took inspiration from the construction of covers
used in Europe and America, to derive an Australian counterpart,
which would provide the very best of functionality and
performance.
The cover is constructed of high-grade PVC extrusions,
which interlock tongue in groove. The panels are hollow
to ensure high buoyancy floatation and insulation to the
pool water. Completely sealed, the panels create a floating
floor on the surface of the water. The panels are fitted
well in to the internal shape of the pool and in some
instances, can be adapted to suit varied pool shapes.
Pool owners using the cover as an additional safety barrier
will have the cover floating above a specially constructed
safety ledge 50 mm wide (in new pools). A stainless steel
safety handrail can be installed into existing pools to
provide the same benefits.
The Swimroll Automated Pool Covers rolls onto the pool
fully motorised. The press of a button, flick of a switch
or turn of a key triggers it. Swimroll may be installed
with a remote control device to provide further convenience
to user.
Swimroll Automated Pool Cover Systems can be located below
or above ground. The below ground installation provides
the perfect aesthetic, totally concealing the device when
not in use and maintaining the design integrity of the
pool. If located above ground, several alternatives are
available to the pool owner. The cover can be mounted
on a stylish slim-line stainless steel roller housing
or as some architects have done, designed planter boxes
to house the device and provide planting area for shrubs
and flowers. If Swimroll is specified prior to pool construction,
requirements for its underground housing can be provided
to the pool builder.
Above Ground Installations
The above ground installation provides an aesthetically
pleasing installation option for existing pool owners.
The Swim Roll stainless steel roller unit is mounted on
the pool edge. Once mounted, several design alternatives
are available to the pool owner. The axle may be housed
in a classic stainless steel frame, or as some architects
have done, designed plantar boxes to house the device
and provide planting area for shrubs and flowers
Below Ground Installations
The below ground installation provides the perfect aesthetic,
totally concealing the device when not in use and maintaining
the design integrity of the pool. If Swim Roll is specified
prior to pool construction, requirements for it’s
underground housing can be provided to the pool builder
Pool Problems & Swimroll
Solutions
Indoor
Pools
The common problems associated with indoor pools are:
1. Pool running costs are
very high! They are always heated. Without a good
pool-cover, elaborate ventilation systems are required
to maintain comfortable climatic conditions. With a Swimroll
Pool Cover installed, room heating and ventilation is
almost superfluous. Without evaporation, the humidity
level is dramatically reduced.
2.
Building maintenance: Costs are very high due to
the rapid deterioration caused by condensation (where
the heated water causes moisture accumulation on all surfaces
colder than the water temperature). Corrosion of metals,
rotting timber and rising damp are all side effects of
indoor pool condensation. A properly fitted Swimroll Pool
Cover insulates against heat loss, eliminates evaporation
and condensation completely. There are no associated problems
once the Swimroll cover is in place.
Outdoor
Pools
The common problems associated with outdoor pools are:
1. Pool Safety - fences
can be climbed, gates left open. Swimroll provides an
impenetrable surface when operated according to the manufacturer’s
instructions. When fully closed, the cover can sustain
the weight of approximately 80 kilos. The cover remains
buoyant and, with the safety handrail or integrated safety
ledge in place, nothing can slip between the side of the
pool and the internal wall of the pool*.
* In Australia at this time Swimroll Automated Pool Cover
Systems do not replace the need for a security fence around
your pool. Parental supervision is always recommended
for children in the vicinity of any body of water. Swimroll
is not to be relied upon as a safety cover.
2.
Pool Maintenance
Leaves, dirt and debris - Cost time and money to remove
and constantly clean. Swimroll provides a solid surface
to the pool that prevents leaves, twigs and falling branches
from entering the pool water. The tight fitting Swimroll
traps all dirt and debris that lands on the cover when
closed which is then fed into the skimmer boxes when the
pool cover retracts – Swimroll cleans it’s
self!
Heat, Water & Chemical loss
Pools require constant heating. Most private pools
stand idle for at least 23 hours per day. This is where
the unprotected pool evaporates your budget unnecessarily.
Swimroll fits your pool perfectly. It insulates against
heat loss saving up to 80% of heating energy, and many
m3 of water. Swimroll prevents chemical evaporation from
the water, maintaining more consistent chemical readings
and ensuring lowest possible chemical consumption and
cost. Swim Roll’s range of designer colours includes
"Swimroll Solar Profile". The Swimroll solar
profile captures the heat of the sun within their internal
structure replacing the need for solar heating and almost
totally eliminating heat loss! The installation of a Swimroll
Automated Pool Cover System translates into huge heating
bill reductions, and more environmentally friendly operation
of your pool.
Swimroll
Installation
Each Swimroll cover is individually made and fitted according
to the final laser-light pool measurement. As such, Swimroll
is customised to the particular pool and adjustments are
made at installation to ensure a smooth and easy fit.
Swimroll Manufacture
Swimroll has been available in Australia since 1991 exclusively
manufactured by Remco. The cover and operation mechanism
is manufactured in a purpose built factory Melbourne Australia.
Swimroll Guarantee
Swimroll carries a 5-year guarantee. You can be assured
of premium quality and excellent performance.
Swimroll Colours
SWIM-ROLL is available in seven colours _ Clear, White,
Solar Black, Aquatic Blue, Rock Grey, Pebble-stone and
Limestone Yellow.
Please note the colours displayed below are for illustration purposes only, please request a physical sample before ordering.
Swimroll Control Options
Swim Roll is available with three practical control options,
designed for ease of use and security:
Push-button
Key switch control: provides owner with a lockable option.
Remote control: total ease of use.
